Speedee Trim Cordless Trimmer with P2 Blade Dry Trim
The Speedee Trim Cordless Trimmer with P2 Blade is the easiest way to hand trim dry plants with precision and ease!
The Speedee Trim Cordless Trimmer with P2 Blade features a lithium ion battery offering 80 minutes of run time for a 2 hour charge. Charges from a standard 120VAC plug with additional battery/charger package available.
Primarily for dry trimming, the Speedee Trim Cordless Trimmer with P2 Blade was designed as an enhancement of the Piranha blade providing for 3 separate cutting functions. Slightly thicker blade for increased durability and longer teeth with wider spacing for better reach make it more effective and versatile than the previous version. The concave tooth configuration from the base allows for more effective volume trimming as it syncs to the natural contour of the flower. Longer teeth at the tip allow for increased precision when spot trimming just as scissors would do. Additionally, the gap between the base teeth and the tip allow for small stem cutting up to about 1/8″.
Speedee Trim Cordless Trimmer with P2 Blade comes with:
- One Cordless Motor with Removable Battery and Charger
- One “Dry Trim” P2 Blade
- One Blade Scrubber Box
Electric Trimmer Specs: 120V AC, 60Hz .04 AMPS
- Weight: 1.21 lbs
- Charge Time: 2 hours from 120V AC outlet
- Run Time: 80 minutes
- Tooth Section length: 1 7/8”
With reciprocating tapered blades, Speedee Trim is uniquely engineered for Lightning Fast Precision Plant Trimming. Unlike other trimmers, Speedee Trim’s custom blade allows you to get in the tight spots on your plant removing only what you want to take off while leaving the surrounding foliage intact. Can also be used in conjunction with any of the larger scale trimming machines for a final trim.
Instructions for Speedee Trim Use:
Trim flowers with the stem pointed either toward or away from you so that the flat part of the leaves catch in between the teeth. Move the blade in a sweeping motion across the plant going around the stem. The amount of material removed is determined by how close the blade is held to the flower and the angle of the blade in relation to the stem. The closer the blade is angled toward the stem, the more material you will remove and vice versa. Spot trimming can be done by angling the teeth at the blade tip so that it’s only the tip contacting the plant. Small precision cuts can be made by this action without touching the surrounding flower.
Cleaning Trimmer Blades in Scrubber Box:
Clean blades by filling cleaner box 3/4 capacity with isopropyl alcohol. Dip blades in box with repeating up and down motion. Never scrape the blades with metallic material because this will damage the blades causing them not to perform as well. Be careful not to drop or bend the blades as this can throw the alignment off.
Speedee Trimmers are the easiest and quickest way to hand trim your plants while saving time, money and your finger strength! These trimmers are a cutting-edge (literally) method to trim flowers!