AutoPot AQUAvalve Silicone
Aquavalve Silicon replacement part. Compatible with AQUAvalve 5 (bottom float) and AQUAvalve 4 Black and AQUAvalve 3 Blue (top float and bottom float).
This piece of silicone is used in the top float portion of the AQUAvalve 5 and the top AND bottom float portion of the AQUAvalve 4 and AQUAvalve 3. The bottom float silicone piece for the AQUAvalve 5 is available here.
The AQUAvalve is supplied with every AutoPot Watering System. Once connected to the water supply, the AQUAvalve will control the flow of water to the plants by simple gravity pressure from a reservoir or tank of any size. No pumps, mains water pressure, electricity or timers are required.
Once connected to a reservoir the AQUA valve will open and allow water to fill the tray to a pre-set level of 20mm. The AQUA valve will not refill the tray until all the water has been used; this ensures that the plants are not constantly sat in water. Once all the water has been used by the plants the AQUA valve will re-open and refill the tray.
The AQUA valve is a simple and very effective watering device, so needs to be treated with care. Keep the AQUA valve and the tray it sits in clean, free of obstructions, soil particles and it will feed and water your plants for many years.
AutoPot Watering Systems require no power, pumps, mains water pressure or timers to operate. All AutoPot Watering Systems operate by simply connecting to a reservoir of any size and only need gravity pressure to function. AutoPot Watering Systems are undoubtedly some of the most water efficient irrigation’s in the hydroponic market. No water is wasted, resulting in huge water and fertilizer savings of up to 50%.
Increase gravity and flows with a Tank Stand!
There are no reviews yet.