- Free Same Day Shipping on orders received before 3:00pm PST
- Discrete Unmarked Packaging!
- Lowest Price Available Online
- Save Time, Money and Energy and go Automatic!
Trimpro Automatik XL with FREE Debudder Bucket Lid
All Trimpro Trimmers come with FREE Discrete Same Day UPS Ground Shipping from Web Hydroponics! Expedited shipping options available.
Each Trimpro Automatik XL comes with a free Debudder Bucket Lid ($29.95 value)!
The Trimpro Automatik XL was designed to respond to the needs of large producers. The Trimpro Automatik XL has a greater capacity and a productivity ratio 5 times superior to its predecessor, The Trimpro Automatik. The fluted design of the grate facilitates the plants movement. When combined with the dimmer on the motor regulating the whirlwind velocity plus the height adjustable six (6) blade assembly, the operator is always in full and precise control of the Automatik XL and the finished product.
For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Trimpro Automatik XL do the rest
Trimpro Automatik XL General Warnings:
- Never place your fingers, gloves or any other body part in contact with the grate or the blade.
- Never apply pressure on the grate.
- Do not use scissors, knives or any instrument above the grate.
- Safety glasses and gloves are required at all time.
- The gloves have to be tight enough so they don’t get inside the grate slots. A loose glove is dangerous. Be Aware!
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.
Trimpro Automatik XL Technical Details:
Mounted machine: 39″ x 36″ x 51″ Height
Packaging: 34-3/4″ x 34-3/4″ x 31″ Height
Machine only: 162 Lbs
Machine and packaging: 195 Lbs
Option 1: Trimpro Automatik XL (STD): large slots only (7/16″)
Option 2: Trimpro Automatik XL small : Small slots only (1/4″)
Trimpro Trimming Machine Frequently Asked Questions:
How Do I clean My Trimpro Machine?
Use a plastic scraper to collect the pollen build-up. Do not use a metal scraper as it might scratch the coating on the grate and the blade. Use a cloth with rubbing alcohol to finish cleaning it.
How Do I Clean My Trimpro Bag?
Soak the bag in warm water, rub off the build up. You can also soak it in rubbing alcohol for a short amount of time, rub off the residue and simply pass it through some running water to finish cleaning it.
How Do I Adjust The Height Of My Trimpro Blade?
Blade height adjustment instructions can be found for each machine on their respective instruction sheet.
How Often Should I Sharpen My Trimpro Blade?
Trimpro blades are made of tempered steel which makes them very tough and gives them a great lifespan. It is important for the quality of your manicure to keep them sharp. It is manufacturer recommend to have them sharpened every 6 months to every year (highly depending on usage).
How Do I Sharpen My Trimpro Blade?
Sharpening the blade on Trimpro trimmers is a simple process. The most important part of the process is that you should not remove the blade from the hub to which it is attached! The tempered steel blades are balanced on the aluminum hub, allowing optimal operation of the trimmers. If the blade is separated from the hub there is no guaranty that the assembly will be balanced when you put it back into the machine. Sharpening instructions can be found for each machine on their respective instruction sheet.
How Do I Change The Amount Of Air Suction On My Trimpro Machine?
On every machine (except the Rotor) you can bend the flaps upwards to reduce their angle. This creates less air displacement, thus decreasing the amount of suction. You can bend the flaps downwards to increase their angle. This creates more air displacement thus increasing the amount of suction. *CAUTION: When bending the flaps downwards, make sure the flaps do not hit the metal wire brake line.
How Long Is The Warranty On My Trimpro Machine?
There is one year warranty for defective parts. If you are making a warranty claim, please have in hand the serial number engraved on the underside of the frame of the machine.